How Much Does Anchor Point Certification Cost in Sydney?
Anchor point certification is the annual inspection and load-testing of your roof anchor points by a competent height-safety technician, confirming they comply with AS/NZS 1891.4. In Sydney, the cost depends mainly on how many anchors you have, how the roof is accessed, and whether any anchors fail and need remedial work — so the accurate figure is a fixed quote for your roof, not a flat fee. Recertification is required every 12 months.
What is anchor point certification?
Certification is a documented check that each anchor point on your roof is structurally sound and safe to arrest a fall. A technician visually inspects every anchor and its fixing, load-tests it to the manufacturer’s specification, and issues a compliance certificate and tag. Without a current certificate, an anchor point should not be relied on for fall protection — and your workers or contractors shouldn’t use it.
How often do anchor points need to be certified?
Every 12 months. AS/NZS 1891.4 — the standard for the selection, use and maintenance of industrial fall-arrest systems — requires that anchor points and height-safety systems be inspected and recertified at intervals not exceeding one year. Some systems also need an inspection after any fall event, before they’re used again. Our annual inspection service keeps your certificate current.
What does anchor point certification cost in Sydney?
There’s no single price — it scales with the job. The main factors that determine cost:
| Factor | Effect on cost |
|---|---|
| Number of anchor points | Most certifiers price per anchor or in bands; more anchors means a higher total but a lower per-unit rate. |
| Roof access & height | Easy ladder access is cheaper than roofs needing rope access or a platform. |
| Roof type | Metal, tile and membrane roofs need different fixings and inspection methods. |
| System age & condition | Older systems are more likely to need remedial work, which is priced separately. |
| First certification vs recertification | A brand-new install and certify costs more than an annual recheck of a known system. |
Because every roof is different, certification is priced per job rather than a flat fee. Annual recertification of an existing system is quoted on your anchor count and access, while supply, install and certify of new anchors is quoted per project. The most accurate figure is a fast, fixed quote once we know your roof — request a quote and there are no hidden fees or surprise add-ons.
What’s involved in the certification process?
- Book an inspection — we confirm your address, roof type and anchor count.
- On-site inspection and load test — every anchor is visually checked and load-tested to spec.
- Remedial flagging — any anchor that fails is tagged out and a repair or replacement is quoted.
- Certification and tagging — compliant anchors are tagged with the test date and next-due date.
- Documentation — you receive a compliance certificate and report for your WHS records.
It’s the same process covered on our height safety certification page and booked through our annual inspection service.
What happens if an anchor point fails certification?
A failed anchor is tagged out so no one uses it, and we quote the fix — usually re-fixing or replacing the anchor (for example, upgrading to a compliant metal roof anchor point). Once repaired, it’s re-tested and certified, so you’re never left guessing which anchors are safe.
Do I legally need certified anchor points?
If people work at height on your building, effectively yes. Under NSW WHS law, a PCBU (the person conducting a business or undertaking, such as a building owner or manager) must provide a safe system for work at height. If your building relies on roof anchors for window cleaning, gutter work, maintenance or solar, those anchors must be compliant and current. An expired or untested anchor exposes you to both a safety risk and a liability risk.
Frequently asked questions
How long does anchor point certification take?
Most residential and small-commercial roofs are inspected and certified in a single visit, often within a couple of hours depending on anchor count and access.
Is certification the same as installation?
No. Installation is fitting the anchors; certification is the load-test and compliance sign-off. New installs are certified at handover, then recertified annually.
What standard applies to roof anchor points in Sydney?
AS/NZS 1891.4 for the use and maintenance of fall-arrest systems, alongside AS/NZS 5532 for the anchor devices themselves.
What if I don’t know how many anchor points I have?
That’s fine — we identify and document every anchor as part of the inspection, so your certificate reflects the full system.
How will I know when recertification is due?
Each anchor is tagged with its next-due date, and we can remind you ahead of the 12-month mark.
Ready to get compliant? Request your anchor point certification quote and we’ll confirm a fixed price for your roof.